Items filtered by date: October 2016

The global plastics industry needed to have a ‘zero tolerance’ towards plastic waste, according to Patrick Thomas, the chairman of European trade body Plastics Europe.

Speaking at a presentation at the K Show in Dusseldorf, Thomas – who is also chief executive of German materials giant Covestro – said it was “utterly ludicrous” to put plastic waste in the ground.

The industry already had a zero tolerance towards plastic going to landfill and ending up in the marine environment, and it had to show the same attitude towards plastic waste in general, he argued.

“Every tonne of plastic that goes to landfill is a waste. It is too valuable a resource to go that way,” he said.

And Thomas said there were 100 environmental projects around the world involving 65 trade organisations seeking to highlight the issue of marine waste and educate consumers on disposing of their plastic waste responsibly, so that it did not end up in the marine environment.

 

“Plastic should never find its way into the sea,” he added.

Thomas said consumers had to change their behaviour in order to raise recycling rates, with some countries being better than others at getting its citizens to “do the right thing”.

And as restrictions on landfill came into effect, countries that had brought in legislation saw recycling activity increase, Thomas argued.

Areas that should be addressed to boost recycling included resource efficiency, education, public policy, the sharing of best practice and the right infrastructure being in place to deal with the waste flow, he added.

“The plastics industry, and particularly the industry in Europe, is resilient and aware of the challenges it faces. It has always adapted, and it will continue to do so to make the world a better place,” Thomas said.

 

The Covestro boss also said he believed the European end-of-life vehicle directive had failed, since fewer than half the region's vehicles had been captured in the data that was presented.

“Without an accurate understanding of what information you are dealing with you cannot design policy. And understanding the impacts of the policy is vital.”

Plastics Europe was “actively engaged” in seeing that actual figures were being taken on board, Thomas said.

Karl Foerster, Plastics Europe’s executive director, meanwhile confirmed that the trade body’s new packaging group would focus on, among other areas, life-cycle issues around packaging.

“At the end of its life [packaging material] is a valuable resource,” he said

Published in Blog Posts

Düsseldorf , Germany — By the end of next year, Dow Chemical Co. (Hall 8a/K48) will have opened four new polyethylene production lines on the U.S. Gulf Coast — and longtime company executive Jim  Fitterling  is looking forward to that opportunity.

“The old Dow would have looked at new plants as growth from a volume standpoint,” Fitterling said in an Oct. 19 interview at K 2016. “But now, no one is doing as much with new product innovations as we are.

“We know where this material is going before we start the plant,” added Fitterling, who serves as president and chief operating officer for Midland, Mich.-based Dow. “We’re working with large multinationals that are driving the packaging market. We’re making our decisions based on what they’re doing and building flexible assets.”

PE and related products made on the new Dow lines will be “at the more specialized end — not the commodity space,” according to Fitterling. This will include specialty materials sold by Dow under the Affinity, Engage and Intune trade names.

And although some market watchers have expressed concerns about the abundance of North American PE expansions — more than 6 billion pounds of capacity will be added next year, with more to come in 2018 and beyond — Dow officials aren’t pressing the panic button.

“No question there will be more exports, but our Mexican customers are looking for more product, and the U.S. is starting to come back,” Fitterling said. “It’s been a good year in the automotive space, and we’re seeing good things in packaging, consumer goods and hygiene.”

 

Caroline SeidelFitterling

Regional PE expansions have been fueled by newfound supplies of low-priced natural gas feedstock. Fitterling said that Dow expects that advantage to continue. “Energy is competitive, and America is competitive again,” he explained. “The region is still going to be a long-term, low-cost supplier.”

In addition to the Gulf Coast, Dow’s Sadara Chemical joint venture in Saudi Arabia has begun ramping up PE production and delivered its first product to India in February. “Sadara and our Gulf Coast projects will enhance Dow’s global footprint to bring us closer to our customers,” Packaging and Specialty Plastics President Diego Donoso said in a news release.

Dow’s pending merger with fellow U.S. plastics and chemicals giant DuPont Co. is being reviewed by regulators in the European Union, Fitterling said, but is expected to be completed by the end of 2016 or early 2017. Some parts of both firm’s plastics and agricultural businesses may be divested in order for the merger to be approved.

“We’re looking at remedies to satisfy that,” Fitterling said.

At K 2016, Dow is presenting new applications under the theme of “The Face of Innovation.” The firm’s R&D experts, Pack Studios innovation centers, and Technical Services & Development leadership allow Dow to collaborate with customers to develop solutions that meet consumer preferences, Donoso added.

Officials said that Dow is working with Sino-Amaranth, a Chinese grass farmer, and China Sun Pharmaceutical Machinery Co., an equipment manufacturer in China. Through a collaborative innovation process at Dow’s Pack Studios innovation center in Shanghai, a new application was developed that elevated the bale silage industry in China, improving transportation, storage and nutritional value of animal fodder for farming.

For the field hockey tournament at the 2016 Olympics in Rio de Janeiro, an elite playing surface made of Dow resins was created to boost the technical skills of the players. The turf system delivered a high-performing and consistent field of play throughout the busy Olympic competition schedule, officials said.

In personal hygiene, Dow recently collaborated with machine manufacturer Windmöller & Hölscher (Hall 17/A57) to develop a new application that meets growing global demand for hygiene products that offer excellent mechanical performance and processability, along with improved skin health requirements and personal comfort. The result of the partnership was a new, ultrathin, blown machine direction orientation (MDO), breathable film for baby diapers made of Dow’s Dowlex PE resins.

For consumers looking for a soft touch experience, Dow’s PoucHug offers packaging makers a new solution to enhance shelf presence, functionality and conversion efficiency, officials said. It also provides the opportunity for a full polyolefin-based structure while meeting the growing trend for a more authentic, natural and premium look, they added. Dow’s new Agility-brand low density PE performance resins have been developed to challenge current packaging performance limits.

The new Agility family for the extrusion coating market brings performance benefits in output, mechanics, optics and flexibility, officials said. The materials expand Dow’s current family of Agility resins to make faster and lighter coatings, they added.

In 2015, Dow had annual sales of nearly $49 billion and employed approximately 49,500 people worldwide. The Company’s more than 6,000 product families are manufactured at 179 sites in 35 countries across the globe.

Published in Blog Posts

 

 

Feb 09, 2016, 07:30 ET from Transparency Market Research

According to a recent market research report published by Transparency Market Research, the global polyethylene wax market is expected to develop at a CAGR of 3.7% during the period from 2015 to 2023. The report, titled "Polyethylene Wax Market - Global Industry Analysis, Size, Share, Growth, Trends and Forecast, 2015 - 2023", estimates the global polyethylene wax market to reach US$359.1 million by 2023. In 2014, the overall market was valued at US$258.9 million.

Polyethylene wax is manufactured by polymerization of ethylene, a derivative of crude oil. The process of polymerization of ethylene is significant as level of polymerization affects the physical properties of polyethylene wax. Manufacturers have developed the polymerization process to produce wax with desired properties. The report indicates that the increasing demand for polyethylene wax in production of polyvinyl chloride is expected to boost the global polyethylene wax market. Growing demand for polyethylene wax from the coatings and printing inks industries will also augment the growth of the global polyethylene wax market during the forecast horizon.

However, volatile prices of crude oil will negatively affect the overall polyethylene wax market as ethylene, the raw material for polyethylene wax, is derived from crude oil. Also, in certain applications, Fisher-Tropsch (FT) wax is used as an alternative to polyethylene wax. Therefore, the expanding market for alternatives is expected to hamper the growth of the market. The global polyethylene wax market has a huge opportunity to grow with the increasing applications of recycled pyrolytic cross-linked polyethylene wax in asphalt industry.

On the basis of various applications, the report segments the global polyethylene wax market into plastic additives and lubricants, cosmetics, adhesives and coatings, rubber, wood and firelogs, candles, packaging, and others including laminates, inks, and polishes. In 2014, in terms of volume, candles accounted for 20% of the global polyethylene wax market and emerged as the largest application segment. However, during the forecast period, plastic additives and lubricants segment is expected to emerge as the fastest growing application segment in the market and dominate the overall market. Additives and coatings is estimated to be the second-largest application segment in the global polyethylene wax market. The demand for polyethylene wax for cosmetics and packaging applications is expected to be moderate during the forecast horizon.

 

The report studies the global polyethylene wax market across five key geographical regions: Europe, North America, Middle East and Africa, Asia Pacific, and Latin America. With more than 30% share in the global polyethylene wax market, Asia Pacific was the leading regional market in 2014, closely followed by Europe andNorth America. During the next few years, Latin America, and Middle East and Africa are expected to witness a moderate increase in the demand for polyethylene wax, owing to the extensive use of polyethylene wax across adhesives and coatings, and plastic additives and lubricants industries. The report profiles some of the key players operating in the global polyethylene wax market such as Honeywell International Inc., The International Group Inc., Arya Chemical Inc., The Lubrizol Corporation, Westlake Chemical Corporation, and Clariant AG.

Published in Blog Posts